Raypak XTHERM 1005 Bedienungsanleitung PDF herunterladen

Project Name / Date

WATER-TUBE POOL HEATERS

PART 1 - GENERAL

1.1 SUMMARY

A. Section includes condensing, gas-fired copper finned-tube, gas domestic pool heaters

Specifier Note: Use as needed

B. Related Sections

1. Building Services Piping – Division 22 10 00

2. Breeching, Chimneys, and Stacks (Venting) – Division 23 51 00

3. Electrical – Division 23 09 33

1.2 REFERENCES

A. ANSI Z21.10.3/CSA 4.3

B. ASME, Sections IV and VIII

C. 2006 UMC, Section 1107.6

D. ANSI/ASHRAE 15-1994, Section 8.13.6

E. National Fuel Gas Code, ANSI Z223.1/NFPA 54

F. National Electrical Code, ANSI/NFPA 70

G. ASME CSD-1, 2009 (when required)

1.3 SUBMITTALS

A. Product data sheet (including dimensions, rated capacities, shipping weights, accessories)

B. Wiring diagram

C. Warranty information

D. Installation and operating instructions

1.4 QUALITY ASSURANCE

A. Regulatory Requirements

1. ANSI Z21.10.3/CSA 4.3

2. Local and national air quality regulations for low NOx (0-20 PPM NOx emissions) pool heaters

B. Certifications

1. CSA

2. ASME HLW Stamp and National Board Listed – Primary

3. ASME U Stamp and National Board Listed – Secondary

4. ISO 9001

1.5 WARRANTY

A. Limited one-year warranty from date of installation

B. Limited twenty-five-year thermal shock warranty

C. Limited five-year primary heat exchanger warranty

D. Limited ten-year secondary heat exchanger warranty

PART 2 - PRODUCTS

2.1 MANUFACTURER

A. Raypak, Inc.

1. Contact: 2151 Eastman Ave., Oxnard, CA 93030; Telephone: (805) 278-5300;

Fax: (800) 872-9725; Web site: www.raypak.com

2. Product: XTherm™ condensing copper finned-tube pool heater(s)

Catalog No.: 6000.63A

Effective: 9-01-09

Replaces: 9-15-08

XTHERM™, TYPE WHP - MODELS 1005-2005

SUGGESTED SPECIFICATIONS

1 2 3 4 5

Inhaltsverzeichnis

Seite 1

Project Name / Date WATER-TUBE POOL HEATERS PART 1 - GENERAL 1.1 SUMMARY A. Section includes condensing, gas-fired copper finned-tube, gas domes

Seite 2

Project Name / Date 2.2 POOL HEATERS A. General 1. The pool heater(s) shall be fired with gas at a rated input of BT

Seite 3

Project Name / Date 3. The igniter will be located to the side of the heat exchanger to protect the device from condensation during start-up. 4. T

Seite 4

Project Name / Date K. Combustion Chamber: The combustion chamber wrapper shall be insulated to reduce standby radiation losses, reduce jacket loss

Seite 5

Project Name / Date 4. Canada only: CAN/CGA B149 Installation Code and CSA C22.1 CEC Part I 5. Manufacturer’s installation instructions, including

Kommentare zu diesen Handbüchern

Keine Kommentare

Raypak XTHERM 1005 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Heizkörper Raypak XTHERM 1005 herunter. Raypak XTHERM 1005 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Heizkörper Raypak XTHERM 1005